 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| JZM FEATURES I Very Low ESR I High Frequency SPECIFICATIONS Capacitance Tolerance Operating Temperature Range WVDC SVDC WVDC Dissipation Factor 120Hz, 25C tan +105C Low ESR Low Impedance Aluminimum Electrolytic Capacitors I Very High Ripple Current I Lead Free Leads 20% at 120Hz, 20C -40C to +105C 6.3 7.9 6.3 .22 Surge Voltage 10 13 10 .19 16 20 16 .16 25 32 25 .16 Note: For above D.F. specifications, add .02 for every 1,000 f above 1,000 f WVDC Leakage Current Time 25 WVDC 2 minute .03CV or 3A whichever is greater Impedance Ratio (Max.) @120Hz -25C/20C -40C/20C 2 3 2 3 2 3 2 3 2,000 hours at +105C with rated voltage and rated ripple current Load Life Capacitance change Dissipation factor Leakage current 25% of initial measured value 200% of initial specified value 100% initial specified value 1,000 hours at +105C with no applied voltage Shelf Life Capacitance change Dissipation factor Leakage current 25% of initial measured value 200% of initial specified value 100% initial specified value Frequency (Hz) Ripple Current Multipliers 120 0.5 1K 0.8 10K 0.9 100K 1.0 Temperature (C) +105 1.0 +85 1.7 65 2.1 SPECIAL ORDER OPTIONS * Special tolerances: 10% (K),-10% + 30% (Q) * Ammo Pack * Cut, Formed, Cut & Formed Leads (See pages 33 thru 37) * * Epoxy end sealed Mylar Sleeve (R) 3757 W. Touhy Ave., Lincolnwood, IL 60712 * (847) 675-1760 * Fax (847) 673-2850 * www.illcap.com JZM WVDC (SV) 6.3 (7.9) + 105C Low ESR, Low Impedance Aluminum Electrolytic Capacitors PHYSICAL DIMENSIONS 10 (13) 16 (20) 25 (32) (F) 470 680 8x11.5 8x14 8x16 10x12.5 8x16 8x16 10x12.5 10x16 10x20 10x23 10x26 12.5x26 10x16 8x20 10x20 10x23 10x20 10x23 10x16 8x20 10x12.5 8x16 10x16 820 1,000 1,200 1,500 1,800 2,200 3,300 3,900 4,700 Convert to inches, divide by 25.4 DxL(mm) L PVC SLEEVE L 15.0 MIN L d L LEAD INFORMATION V.S. CASE DIAMETER + L1 19.0 MIN D1 L L L NOTE: Case Vent is standard on all diameter 8.0mm STANDARD PART LISTING Maximum Maximum ESR ESR 100kHz 120Hz,+25C 25C Maximum RMS Dimensions Ripple Current DxL (mA) +105C (mm) 100kHz Maximum Maximum ESR ESR 100kHz 120Hz,+25C 25C Maximum RMS Dimensions Ripple Current DxL (mA) +105C (mm) 100kHz Capacitance WVDC (F) PART NUMBER Capacitance WVDC (F) 470 470 680 680 680 820 1000 1000 1000 1000 1200 1500 16 25 10 477JZM016M 477JZM025M 687JZM010M 0.564 0.564 0.463 0.390 0.390 0.445 0.315 0.315 0.265 0.265 0.304 0.265 0.036 0.019 0.036 0.028 0.028 0.036 0.028 0.028 0.019 0.019 0.028 0.020 1100 2030 1200 1530 1530 1160 1570 1540 2060 2050 1630 1640 8x11.5 10x16 8x14 10x12.5 8x16 8x11.5 10x12.5 8x16 10x16 8x20 8x16 10x12.5 1500 1500 1500 1800 1800 1800 2200 2200 3300 3900 4700 10 158JZM010MLQ 10 16 6.3 10 16 6.3 10 6.3 6.3 6.3 158JZM010M 158JZM016M 188JZM6R3M 188JZM010M 188JZM016M 228JZM6R3M 228JZM010M 338JZM6R3M 398JZM6R3M 478JZM6R3M 16 687JZM016MLN 16 6.3 687JZM016M 827JZM6R3M 10 108JZM010MLN 10 108JZM010M 16 108JZM016MLJ 16 6.3 6.3 108JZM016M 128JZM6R3M 158JZM6R3M (R) 3757 W. Touhy Ave., Lincolnwood, IL 60712 * (847) 675-1760 * Fax (847) 673-2850 * www.illcap.com L L L L L L S1 D d S 8.0 0.6 3.5 10.0 0.6 5.0 12.5 0.6 5.0 L1=L + 1.5 Max. D1=D + 0.5 mm Max. S1=S 0.5 mm Max. PART NUMBER 0.232 0.232 0.232 0.221 0.193 0.166 0.196 0.173 0.141 0.119 0.106 0.019 0.019 0.013 0.018 0.013 0.012 0.015 0.012 0.012 0.012 0.014 2040 1990 2640 1990 2470 3080 2350 2780 2890 3230 3810 10x16 8x20 10x20 10x16 10x20 10x23 10x20 10x23 10x23 10x26 12.5x26 |
Price & Availability of 477JZM016M
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |